Here are our top picks.
Our Editor’s Best Guitar Potentiometers Reviews
Fender Original 250k Splitshaft Potentiometer, Volume or Tone
Key Features:
-
These are original factory parts from Fender, the company that makes guitars. They are designed to replace worn out or damaged potentiometers on a Fender guitar.
-
These guitar potentiometers have a split shaft, meaning that they can be used with push-pull switches to enable coil-splitting and other wiring options. They have a resistance of 250K, which is a bit higher than average, making them well-suited for use with high-gain amplifiers.
-
This guitar potentiometer includes a nut, washer, and tone capacitor. This allows the shopper to have better control over the sound of their guitar.
-
This is a set of guitar potentiometers that can be used to adjust the volume or tone of single coil pickups.
CTS 500K Electric Guitar Pots Guitar Linear Potentiometer B500K
Key Features:
-
This guitar potentiometer has a split shaft with a fine spline knurled for easy grip. The shaft length is 18.5mm and the shaft diameter is 6mm. The base diameter is 24mm.
-
The guitar potentiometers are made by CTS Taiwan Company. The company has provided a factory diagram to show how the pots are made. If you have any questions about the product, you can verify the diagram to get more information.
-
A guitar potentiometer is a device that is used to control the volume of the guitar. It is typically mounted on the guitar body and consists of a knob that is turned to increase or decrease the volume. The two types of potentiometers are audio taper and linear taper. Audio taper potentiometers increase or decrease the volume in a sloped curve fashion, while linear taper potentiometers increase or decrease the volume in a linear fashion.
-
These guitar potentiometers are used to control either the tone or volume of the guitar, depending on the user’s preference.
-
This package includes one CTS potentiometer, which is used to control the volume or tone of an electric guitar. It comes with a nut and washer for installation.
Guitar Potentiometer Audio Pots A500K OHM Replacement for Electric Guitar Pack of 10
Key Features:
-
These guitar potentiometers have a long knurled shaft that is split in the middle. They are full size, meaning they are the same size as a regular guitar potentiometer.
-
These guitar potentiometers are perfect for replacing and upgrading volume and tone controls on your guitar. They are high quality and will improve the performance of your guitar.
-
This guitar potentiometer is a mini control pot with a 500K-ohm resistance.
-
This guitar potentiometer has a coarse knurled shaft that fits most control knobs.
-
This is a set of guitar potentiometers that the shopper can use to improve their sound. The set includes three different types of potentiometers, each of which can be adjusted to the shopper’s preference. The set also comes with a guide that explains how to use the potentiometers to get the best sound.
Musiclily 15mm Guitar Mini Size Pots 500K Short Split Shaft Linear Taper Potentiometers (Pack of 2)
Key Features:
-
This guitar potentiometer is ideal for electric guitars or basses. It fits Stratocaster and Les Paul 6mm knobs, but should also fit other 6mm knobs as well.
-
Guitar potentiometers are used to control the volume and tone of your guitar. These particular potentiometers have a 500K ohm resistance and linear taper, which means that they will provide a smooth, even response when you turn them.
-
These guitar potentiometers have a shaft length of 15mm and a shaft diameter of 6mm.
-
This guitar potentiometer is mini size with a whole length of 24mm and a base diameter of 16mm.
-
These are guitar potentiometers that come in a package of two.
BQLZR Guitar Potentiometer B500k 16mm Base Dia 18mm Shaft Pack of 10
Key Features:
-
This pot is a 500k-ohm control pot. It is used to control the volume or tone of an electric guitar.
-
This guitar potentiometer has a split shaft with coarse knurling. This means that the shaft is split into two parts, and the knurling is a raised, textured pattern on the surface of the shaft. This provides a better grip for turning the potentiometer.
Fender 500K, Split Shaft Potentiometer for Volume or Tone
Key Features:
-
This is a genuine replacement part for a Fender guitar. It is made to the same specifications as the original part and will work with any model of Fender guitar.
-
These guitar potentiometers are of high quality, meaning that they are well-constructed and designed to withstand heavy use. They should provide reliable performance and accurate results.
-
This guitar potentiometer is durable and will last a long time.
-
This guitar potentiometer is made in Taiwan.
10 Pack Quality US Thread 3/8 inch x 32 Potentiometer Nuts for Guitar Pots or Jacks
Key Features:
-
This guitar has nickel plated potentiometers. This means that the potentiometers have a coating of nickel on them, which makes them more resistant to corrosion and wear.
-
The guitar potentiometers are nickel plated, which means they are coated with a thin layer of nickel. This helps to protect the metal from corrosion and gives it a shiny finish.
- means a thin layer of nickel is applied to the surface of the potentiometer. This is done to improve the conductivity and durability of the potentiometer. The “500k” is the resistance of the potentiometer. This is a measure of how much the potentiometer will affect the signal passing through it. The higher the resistance, the greater the effect.
-
This guitar potentiometer has a 3/8-32 thread.
-
This guitar has potentiometers that are made out of brass, which will not rust.
Musiclily A500K Mini Guitar Pots Split Shaft Long Audio Taper Guitar Potentiometers for Fender Stratocaster Telecaster Guitar Bass Replacement (Pack of 2)
Key Features:
-
This guitar potentiometer is a metric size and is a good replacement for import Fender strat and Gibson Les Paul guitars.
-
This guitar potentiometer is a mini pot with an audio taper. It is rated at 500K.
-
This guitar potentiometer has a shaft length of 18mm, a knurled shaft diameter of 6mm, a whole length of 24mm, and a base diameter of 16mm.
-
This guitar potentiometer has a split shaft that is knurled for easy grip. It comes with a nut and washer for secure installation.
-
This package includes two guitar potentiometers.
FLEOR 2pcs Full Size Guitar Volume Pot 18mm Shaft Audio Taper Guitar Potentiometer A500K
Key Features:
-
These guitar potentiometers have an audio taper, meaning that the resistance to the current flowing through them changes gradually and smoothly as they are turned. They have a resistance of 500K ohms, which is a fairly high resistance.
-
This guitar has two split shafts, which means that the shafts are separated into two parts. This makes it easy to adjust the volume and tone of the guitar.
-
This guitar potentiometer can be used as a volume or tone pot, making it a versatile and useful tool for your guitar-playing needs.
-
This guitar potentiometer has a coarsely knurled shaft that is 18mm in diameter.
-
These guitar potentiometers are A500K models, meaning that they have a 500kohm resistance. They are designed for use with guitars, and include 2 pots in a package.
Musiclily Metric Full Size 500K Pots Split Knurled Long 18mm Shaft Linear Taper Guitar Potentiometers for Stratocaster and Telecaster Electric Guitar Bass Parts(Pack of 2)
Key Features:
-
These guitar potentiometers are designed to fit Stratocaster and Les Paul guitars with 6mm knobs, but may also fit other guitars with 6mm knobs. They are ideal for electric guitar or bass building.
-
These guitar potentiometers have a full resistance of 500k ohms and a linear taper. This means that they have a linear resistance curve, meaning that the resistance increases linearly as the knob is turned. This makes them ideal for use as volume or tone controls on electric guitars.
-
These guitar potentiometers have a shaft length of 18mm and a shaft diameter of 6mm.
-
This is a full-size guitar potentiometer that is 29mm long and has a base diameter of 23mm.
-
These guitar potentiometers are designed to give you better control over your sound. They are made of high quality materials and are very easy to install.
Guitar Potentiometers FAQs
What is a guitar potentiometer?
A guitar potentiometer is a volume control for an electric guitar. It is typically located on the body of the guitar, near the neck.
What are the different types of guitar potentiometers?
There are many different types of guitar potentiometers, but the most common are linear taper, audio taper, and logarithmic taper.
What are the benefits of using a guitar potentiometer?
Some benefits of using a guitar potentiometer include increased control over the sound of the guitar, greater efficiency in how the guitar signal is processed, and improved durability of the guitar. Additionally, a guitar potentiometer can help to create a more consistent sound from the guitar, as well as help to reduce noise and feedback.
How do I install a guitar potentiometer?
There is no one-size-fits-all answer to this question, as the installation process for a guitar potentiometer will vary depending on the make and model of the guitar. However, in general, the process will involve removing the old potentiometer from the guitar and then installing the new one in its place.
How do I wire a guitar potentiometer?
There are a few different ways to wire a guitar potentiometer, depending on the type of guitar and the number of pots. The most common way is to wire the pot to the ground and the hot wire to the input.
Conclusion
There are many great guitar potentiometers on the market. Our list of the best guitar potentiometers will help you save time researching and choosing the best one for you.